I & C Technician II

Date Posted: 12/03/2001 Job Number: #02ICT-BC E-mail: submit@engineeringgeniuses.com Description I & C Technician II - $30-$40K, salary commensurate #02ICT-BC Shift work may be required. Our client is seeking an I & C Technician II to perform routine and emergency repairs of the plant instrumentation & plant instrumentation and control systems including preventive maintenance, troubleshooting and repair of circuit breakers, motor control centers, motors, generator, transformers, electrical metering and protective relays, turbine generator instruments, control circuits, combustion controls, drum level controls, recording device, alarm circuits and settings, calibration of the CEMS system. Will perform other duties as deemed necessary and help supervise laborers on occasion. HS Dipoloma or GED with 3 years experience in maintenance, troubleshooting and repair of pneumatic devices, electrical and electronic systems. Formal technical or apprentice training is desirable, or equivalent combination of education and experience. 4-10 hour days per week/6am to 4:30pm. MUST have good ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret graph bars. Ability to read and interpret documents such as rules, technical procedures, operating and maintenance instructions, and other procedure manuals. Qualified candidates ONLY, please email resume, along with salary requirements, schedule of availability and relocation issues to: submit@engineeringsolutions.com Please refer to position #02ICT-BC when responding to this posting.

Wafer Fab Technician

Date Posted: 08/20/2001 Job Number: 19WFT-EM E-mail: info@engineeringgeniuses.com Description Travel Required - Negligible Contract/Full-Time - Full-time City/State - Los Angeles, South Bay Degree/Skills Required - BS in Electronics/Optics or related Engineering degree. Company Info - A well funded spin-off of a reputable leader in the optics and photonics industry Other Info - This is an immediate opening. Job Description - Our client, a very WELL-funded pre-IPO startup seeks a Wafer Fab Technician and Equipment Technicians to repair/fix, troubleshoot and perform preventative maintenance. $40-$50K++ salary commensurate with experience. This is a ground floor and very promotoble opportunity SKILLS REQUIRED: MIN 2-5 years HANDS-ON exp. in troubleshooting, repairing and preventative maintenance of wafer equipment is REQUIRED. Working knowledge of photolithography tools is HIGHLY DESIRABLE. MUST be capable of tearing equipment apart and fixing. Familiarity with process optimization, semiconductors lab environments is a PLUS.Qualified candidates ONLY, please email resume, along with salary requirements, schedule of availability and relocation issues to: submit@engineeringgeniuses.com. Please refer to position 19WFT-EM when responding to this posting.

PCB Designer

Date Posted: 08/20/2001 Job Number: 03PCBD-LS E-mail: info@engineeringgeniuses.com Description Travel Required - Negligible Contract/Full-Time - Full-time City/State - New Jersey Degree/Skills Required - MIN two-year degree, technical certificate or equivalent 5+ years relevant experience. Company Info - Leader in High Capacity Optical Switches. Other Info - This is an immediate opening. Job Description - Our client is seeking a PCB Designer for the Design and documentation of multi-layer printed circuit boards assemblies using Veribest2000 and Mentor software tools. Will work closely with electrical & mechanical design engineers to complete design projects on time and work with board & assembly suppliers to provide timely data input and resolve board manufacture issues. SKILLS REQUIRED: MIN 5+ years experience with PCB design and layout with 1-2 years of Veribest design tool hands on experience STRONG hands-on design of multi-layer PWB's & related products including fabrication, assembly drawings AND PCB Layout of Multi-Layer SMT, RF, Opto-electronic and Digital PWB's. is REQUIRED. Experience using Veribest PCB is HIGHLY DESIRABLE, but high end PCB layout tool experience will be considered. Design exp. with fine pitch BGA Packages, blind and buried vias and controlled impedance techniques is a PLUS. This candidate must have good work ethic and skills to work with a number of development engineers and test engineers. is CRUCIAL. Excellent communication and interpersonal skills with good attitude, work ethic and effective teamwork. Ability to work with others with minimum supervision in a fast paced environment. US Citizenship/Permanent Residency is PREFERRED. COMPANY INFORMATION: Leader in High Capacity Optical Switches. OTHER INFORMATION: This is an immediate position. Qualified candidates please email resume, along with salary requirements and relocation issues to: submit@engineeringsolutions.com Please refer to position 03PCBD-LS when responding to this posting.

CCIE

Date Posted: 08/20/2001 Job Number: 09CCIE-AF E-mail: info@engineeringgeniuses.com Description Travel Required - As needed Contract/Full-Time - Full-time City/State - Metro DC Degree/Skills Required - Bachelors Degree in appropriate discipline plus a Cisco Certified Internetworking Engineer (CCIE) certification is required. Engineer must have a current or recently inactive Secret or better clearance that is available for transfer. Company Info - A reputable, cutting edge and rapidly expanding network consulting company handling state department, gov’t. and commercial contracts. Other Info - This is an immediate position. Job Description - In depth knowledge and experience with the design of global enterprise network infrastructure and integrating the latest internetworking management tools into an existing HP OpenView Unix platform. Experience with interpreting system requirements, developing network architectures, and performing detailed network designs. Develop WAN/MAN Engineering Design Plans: Gather and evaluate WAN baseline documentation (DTS-PO, BMC, ALMA, Capacity Plan, Security Plans) Develop WAN requirements definition Review DTS-PO architecture and alternatives (MCI, Equant, etc.) Gather and evaluate domestic baseline documentation (MAN, CONUS, TWD) Develop MAN requirements definition Review domestic MAN design alternatives (Bell Atlantic, Wireless, etc.) Design and Implementation of OpenNet Internetworking Infrastructure: Network level encryption (DES, IRE, IPSec, X.509 Certificates) Internetworking equipment upgrades (Cisco, routers, switches) Internetworking configuration review (IP addressing, OSPF, EIGRP, BGP, etc.) Assist in the Integration of Internetworking Management Tools: HP Openview Remedy trouble tracking Microsoft Systems Management Server Cisco Works 2000 Cisco Netsys Cisco new management products SKILLS REQUIRED: Minimum of 5 years experience. Will involve operations and maintenance of the router networks (both overseas and domestic). Developing a global network and a corresponding management infrastructure is a complex task requiring specific engineering expertise and disciplined project management. COMPANY INFORMATION: A reputable, cutting edge and rapidly expanding network consulting company handling state department, gov’t. and commercial contracts. OTHER INFORMATION: This is an immediate position. Qualified candidates please email resume, along with salary requirements and relocation issues to: submit@engineeringsolutions.com Please refer to position 09CCIE-AF when responding to this posting.

ASCI Application Specialist/Computational Scientist

Date Posted: 08/20/2001 Job Number: 01FN-NL E-mail: info@engineeringgeniuses.com Description Travel Required - Negligible Contract/Full-Time - Full-time City/State - Livermore, CA Degree/Skills Required - Bachelor and above The ASCI Application Specialist/Computational Scientist should possess the following skills: A background in parallel processing on distributed and shared memory IBM SP systems Experience in the use of MPI, Pthreads, and OpenMP An understanding of the architecture of the individual nodes on the SP system and the ability to tune scientific codes for high levels of performance on each node as well as across all nodes of the IBM SP The ASCI Application Specialist/Computational Scientist will be expected to perform the following duties: User support to the LLNL ASCI community working on IBM’s massively parallel RS/6000 SP systems on issues pertaining to efficient implementation of parallel codes as well as providing assistance with the use of IBM software (e.g., Fortran, C, and C++ compilers, loaders, Parallel Operating Environment, profiling and debugging tools), on IBM SP systems. Optimizing and debugging parallel and sequential codes. Executing and assisting with sequential and large scale benchmarks on the LLNL ASCI systems. Citizenship -Security Clearence Status: US Citizen - After hire, we will have you submit and application for Security Clearance Company Info - This is a leading computer services and consulting firm. Other Info - This is an immediate opening. Job Description - The ASCI Application Specialist/Computational Scientist should possess the following skills: A background in parallel processing on distributed and shared memory IBM SP systems Experience in the use of MPI, Pthreads, and OpenMP An understanding of the architecture of the individual nodes on the SP system and the ability to tune scientific codes for high levels of performance on each node as well as across all nodes of the IBM SP The ASCI Application Specialist/Computational Scientist will be expected to perform the following duties: User support to the LLNL ASCI community working on IBM’s massively parallel RS/6000 SP systems on issues pertaining to efficient implementation of parallel codes as well as providing assistance with the use of IBM software (e.g., Fortran, C, and C++ compilers, loaders, Parallel Operating Environment, profiling and debugging tools), on IBM SP systems. Optimizing and debugging parallel and sequential codes. Executing and assisting with sequential and large scale benchmarks on the LLNL ASCI systems.

Oracle DBA

Date Posted: 08/20/2001 Job Number: OD-ID E-mail: info@engineeringgeniuses.com Description Travel Required - Negligible Contract/Full-Time - Full-time City/State - Metro D.C. Degree/Skills Required - : Minimum of 2-5 years COBOL database experience.5-10 years of software development and database design experience using recent versions of Oracle.2-5 years working with Graphical User Interface (GUI) tools (Crystal reports, VB, Oracle Forms, etc.)2-5 years base of SQL is necessary and the ability to create triggers and procedures at the database level. The ideal candidates should have at least two years experience in designing and maintaining databased for large logistics applications.Security Requirements: Secret (minimum) and Top Secret Clearances will be required. COMPANY INFORMATION: A well-established custom designer and manufacturer/reseller of PCs, workstations and servers for leading systems integrators including commercial and government customers. OTHER INFORMATION: This is a HIGH growth opportunity and an immediate opening. Only qualified candidates need to apply. Please email resume, along with salary requirements and relocation issues to: submit@engineeringgeniuses.com Please refer to position 0D-ID when responding to this posting. Please include salary requirements and schedule of availability, both to interview and/or start. Company Info - A well-established custom designer and manufacturer/reseller of PCs, workstations and servers for leading systems integrators including commercial and government customers. Other Info - This is a HIGH growth opportunity and an immediate opening. Job Description - : Our client is seeking an experienced and highly qualified Oracle DBA who is capable of interfacing with systems personnel in coordinating the migration from the current COBOL database to the Oracle based system.